Common applications include:
Petroleum-based liquids, non-potable and salty water, fracture and sludge solutions
Rotary drilling: portable drilling, work platforms and thin drilling rigs
Transfer drilling mud or crude oil, and petroleum products with aromatic content up to 50%
Discharge of high pressure liquid sludge, mineral oils, drinking water, etc.
Address these engineering challenges:
Product available when and where it is needed – Global and regional availability
Optimize operational costs with a single source solution – Part of Eaton’s broad portfolio of products available with consolidated shipping and billing
At-Your-Hand Support – Global and regional customer service, engineering, technical support, sales support, as well as a wealth of online tools to answer questions regarding the full range of Eaton products
Product Features
EHP001 – BLACKCAT FRAC Hose
The “Bruiser” cover provides up to 700X more abrasion resistance than our standard rubber hose cover, resulting in fewer external faults. External abrasion is the main failure mode in this application
The tube meets the oil swelling requirements of Class A RMA (> 25%) by reducing service failure in oil exposure applications compared to standard rubber tube material
EHP009 – OILFIELD VACUUM Hose – The corrugated cover reduces the coefficient of friction, resulting in a hose that is easy to move and handle in the workplace. In addition, a smaller radius of curvature can be achieved, up to 33% compared to the EHP500 smooth shell equivalent
Technical information
Frac and Well service:
EHP001 – BLACKCAT FRAC Hoses
Tube: Nitrile Mixture (RMA Class A)
Reinforcement: 4 layer polyester fabric
Cover: BRUISER ™ Abrasion Resistant Cover
Temperature: -40 ° C to + 93 ° C, (-40 ° F to + 200 ° F)
Pressure: 28 bar / 400 psi
H0377 – Kelly Power Drilling Hose
Tube: Nitrile / Hypalon blend
Reinforcement: 4-wire wire
Cover: Neoprene
Temperature: -40 ° C to + 121 ° C, (-40 ° F to + 250 ° F)
Pressure: 207 bar / 3000 psi
Suction and discharge hoses:
EHP007 – Oil field suction hose
Tube: Nitrile mixture
Reinforcement: High strength synthetic fabric – simple steel helical wire; Y
double in 8 “and 10” with an antistatic copper cable
Cover: Nitrile Blend
Temp: -35 ° C to + 70 ° C, (-31 ° F to + 158 ° F)
Pressure: 10.5 bar / 150 psi
EHP009 – Oil Field Vacuum Hose
Tube: Nitrile mixture
Reinforcement: High resistance synthetic fabric with
double steel helical wires
Cover: Synthetic corrugated rubber
Temp: -30 ° C to + 80 ° C, (-22 ° F to + 176 ° F)
Pressure: 10.5 bar / 150 psi
EHP002 – Oil field mud suction and discharge hose
Tube: Synthetic rubber
Reinforcement: High resistance synthetic fabric, single or
double helical wires
Cover: SBR Blend
Temp: -25 ° C to + 70 ° C, (-13 ° F to + 158 ° F)
Pressure: 10.5 bar / 150 psi
Discharge Hoses:
EHP003 – Heavy-Duty Oil Field Liquid Sludge Discharge Hose
Tube: CR Mixture
Reinforcement: High resistance synthetic fabric with antistatic copper wire
Cover: Mixture CR
Temp: -35 ° C to + 80 ° C, (-31 ° F to + 176 ° F)
Pressure: 41 bar / 600 psi
Drinking water hoses:
EHF006 – Soft-wall drinking water discharge hose
Tube: SBR mix
Reinforcement: High resistance synthetic fabric
Cover: EPDM
Temp: -30 ° C to + 70 ° C, (-22 ° F to + 158 ° F)
Pressure: 8.0-10.0 bar / 115-145 psi